|AC Input Voltage||48v 72v|
|AC output waveform||pure sine wave|
|Type||ac to ac inverter|
|Output Frequency||46Hz ~ 65Hz|
|Total Harmonic Distortion(THD)||<5%|
|Maximum AC Output Power||2000w grid connected inverter|
|cooling way||cooling fan|
|AC output voltage||220v 230v 240v|
|Package Size||48cm x 30cm x 15cm (18.90in x 11.81in x 5.91in)|
|Package Weight||7.0kg (15.43lb.)|
MPPT 2000W 2KW Wind Power Grid Tie Inverter with Dump Load Controller/Resistor for 3 Phase 48v 60v 72v wind turbine generator
--Max Efficiency:>92% MPPT Efficiency:99% --DC/AC 45V-90V --AC 220V 230V 240V 50hz 60hz
NEW 2000W Wind Power Grid Tie Inverter Max Efficiency:>92% MPPT Efficiency:99% 1. Low cost and easy installation 2. Directly connect to three phase wind turbine 3. Much better output waveform compare with similiar GTI 4. Improving the efficiency of the entire solar power system Overload protection ,Anti-island protection Short-circuit protection/Reverse polarity protection 5. AC output voltage and current THD 99% This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Technical Data
Model 2000G2-WAL-LCD-S Max. Power Output 2000W Input AC/DC Voltage Range 45V ~ 90V AC Output Voltage Range 190VAC ~ 260VAC Output Frequency 46Hz~65Hz Standby Power Consumption Total Harmonic Distortion Peak Inverter Efficiency 92% Power Factor 0.99 Output Wave Form Pure Sine Wave MPPT Efficiency 99% Over Current Protection Yes Over Temperature Protection Yes Reverse Polarity Protection Yes Anti-Island Protection Yes Stackable Yes Weight ( Kg) 6.5kg Dimensions (W x H x D) 434 x 196 x 88 mm
(1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket,This socket will connect the inverter to the public grid via the AC cable. (4) Cooling fans. (5) Input Terminals. This terminals will connect to the wind turbine.
Inverter Display Instruction
The Inverter display can show many information,The main interface of the display and the icons explainations are show above.
Set Menu:Choose the set menu icon on the main screen interface,click the confirm button to enter into the interface show below,In this interface,can set the LCD backlight always on or auto turn off backlight after 3 minutes no action.
The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid.Select the internal limiter mode,inverter will work under limiter mode,output power of the inverter will be determined by load power.Select the external limiter mode,inverter need a external limiter module working with it.For more details about the limiter function,pls contact supplier. ( this function only useful with limiter type inverter. )
In this interface,the display shows real time power,PV input voltage, inside temperature,date and time.
Clock And Date Setting:
Set the clock and date in this page,save the setting before exit.
Notes: Save the setting after you reconfigurate the working mode or backlight setting.
Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet. Grid Waveform:
This interface will show the real time grid waveform.The grid voltage and frequency also will show in this interface.
The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page.
AC Output Current Waveform and PF Test Of 2000W Model Tested 2000W model at nearly full load,Output current waveform shows good pure sine wave in oscilloscope,PF value also shows in good result,99.8% PF value. Advantages: 1. Advanced patented technology, MPPT efficiency is higher. 2. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. 3. Each inverter need to pass twice testing (20 hours) before leaving factory. 4. Warranty: 2 years of free maintenance and replacement, lifetime technical support. 5. Low cost and easy installation . 6. Free combination. 7. Combination of SGPV does not interact. 8. Improving the efficiency of the entire solar power system. 9. Low power consumption.
1. If your address is remote area by DHL or FedEx,then we will send by other express
2. We can low down some price for less customs duty when shipping, please leave the value of product you want us to declare, otherwise,we will declare by our experience; and we will not bear the high tariff cost,buyer must bear the reponsibility by themselves.
3. The Customers from Brazil please must leave CPF number or CNPJ number, otherwise, the shipping company will refuse the transport;
Payment: 1. We accept Alipay, West Union, T/T,
2. Payment must be made within 3 days of order.
3. If you can\'t check out immediately after auction close, please wait for a few minutes and retry.
Tags: tie inverter, grid tie inverter, grid tie power inverter, Cheap tie inverter, High Quality grid tie inverter, China grid tie power inverter Suppliers.